MCP HubMCP Hub
스킬 목록으로 돌아가기

cultivate-bonsai

pjt222
업데이트됨 Yesterday
5 조회
17
2
17
GitHub에서 보기
메타aiapidesign

정보

이 Claude Skill은 분재 나무 재배에 대한 포괄적인 지침을 제공하며, 종 선택, 가지치기, 철사걸이, 분갈이와 같은 기술적인 원예 작업을 다룹니다. 또한 계절별 관리 일정 수립과 명상적 실천을 통합하는 방법을 포함합니다. 개발자는 분재 관리, 가드닝 튜토리얼, 살아있는 식물을 활용한 웰니스 루틴과 관련된 애플리케이션을 구축할 때 이를 활용해야 합니다.

빠른 설치

Claude Code

추천
기본
npx skills add pjt222/agent-almanac -a claude-code
플러그인 명령대체
/plugin add https://github.com/pjt222/agent-almanac
Git 클론대체
git clone https://github.com/pjt222/agent-almanac.git ~/.claude/skills/cultivate-bonsai

Claude Code에서 이 명령을 복사하여 붙여넣어 스킬을 설치하세요

문서

Cultivate Bonsai

Bonsai → seasonal care + structure + contemplative practice.

Use When

  • Select species (1st / next)
  • Prune (maintenance / structural)
  • Repot (roots circle, soil depleted, growth stalled)
  • Wire branches
  • Seasonal calendar
  • Contemplative practice w/ living tree

In

  • Required: Species (or climate zone for selection)
  • Optional: State (age, pot, health, last repot)
  • Optional: Style (formal/informal upright, cascade, semi-cascade, literati, windswept, forest)
  • Optional: Season + weather
  • Optional: Experience (beginner/intermediate/advanced)

Do

Step 1: Species

Match climate + experience + aesthetic.

Beginner-Friendly Species by Climate:
┌────────────────────┬──────────────────────┬───────────────────────┐
│ Climate            │ Species              │ Why                   │
├────────────────────┼──────────────────────┼───────────────────────┤
│ Temperate (zones   │ Chinese elm           │ Forgiving, fast       │
│ 6-9)               │ (Ulmus parvifolia)   │ recovery, indoor/out  │
├────────────────────┼──────────────────────┼───────────────────────┤
│ Temperate          │ Japanese maple        │ Beautiful foliage,    │
│                    │ (Acer palmatum)      │ deciduous drama       │
├────────────────────┼──────────────────────┼───────────────────────┤
│ Cool (zones 4-7)   │ Juniper              │ Hardy, classic style, │
│                    │ (Juniperus)          │ tolerates wiring      │
├────────────────────┼──────────────────────┼───────────────────────┤
│ Warm (zones 9-11)  │ Ficus retusa          │ Aerial roots, indoor  │
│                    │                      │ tolerant, fast growth │
├────────────────────┼──────────────────────┼───────────────────────┤
│ Any (indoor)       │ Chinese privet        │ Nearly indestructible,│
│                    │ (Ligustrum sinense)  │ rapid budding         │
└────────────────────┴──────────────────────┴───────────────────────┘

Selection Criteria:
1. Hardy in your zone (outdoor bonsai are healthier than indoor)
2. Tolerant of root pruning (essential for bonsai longevity)
3. Produces small leaves naturally or through technique (leaf reduction)
4. Available as nursery stock (don't start from seed — too slow for learning)

Got: Species matches climate + experience + goal.

If err: Unsure → Chinese elm → widest tolerance + forgives beginner mistakes.

Step 2: Meditate Checkpoint

Pre-structural work (pruning/wiring/repotting) → sit w/ tree.

Bonsai Sitting Protocol (5-10 minutes):
1. Place the tree at eye level on a clean surface
2. Sit comfortably at arm's length
3. Observe without planning:
   - Where does the trunk move? Follow its line from base to apex
   - Which branches reach toward light? Which retreat?
   - Where is the tree's natural front? (The side that tells its story)
4. Resist the urge to "fix" anything. The tree has been growing
   toward its own form. Your job is to listen first, then collaborate.
5. When you feel you understand the tree's intention, you may begin work.

If you feel rushed or impatient, you are not ready. Return tomorrow.

Got: Calm, unhurried. Sense of tree's natural movement.

If err: Can't quiet planning mind → do not structural prune. Watering + feeding may proceed w/o checkpoint.

Step 3: Pruning

2 types: maintenance (ongoing) + structural (seasonal).

Maintenance Pruning (any time during growing season):
- Purpose: Maintain shape, encourage ramification (branching density)
- Tool: Sharp bypass secateurs or bonsai scissors
- Technique:
  - Deciduous: Cut back new shoots to 2-3 leaves once they extend to 6-8 leaves
  - Conifer: Pinch new candles by hand (never cut — it browns the needles)
  - Remove: Crossing branches, upward-growing interior shoots, dead wood

Structural Pruning (late winter for deciduous, early spring for conifer):
- Purpose: Establish or refine the tree's fundamental shape
- Tool: Concave cutter (creates a wound that heals flush)
- Technique:
  1. Identify the primary trunk line
  2. Select 3-5 primary branches (alternating left/right, decreasing in thickness upward)
  3. Remove competing leaders, bar branches (directly opposite), and wheel branches (multiple from same point)
  4. Cut flush to trunk with concave cutter — do NOT leave stubs
  5. Never remove more than 1/3 of foliage in one session

⚠️ CAUTION: Structural pruning is irreversible. If uncertain about
a branch, leave it for one more season. You can always remove later;
you cannot reattach.

Got: Cleaner silhouette, better light penetration, clear trunk line.

If err: Too much removed → sheltered dappled light. Reduce water slight (less foliage = less transpiration). No fertilize until new growth.

Step 4: Wiring

Shape branches via anodized aluminum / annealed copper wire.

Wiring Protocol:
1. Select wire gauge: approximately 1/3 the diameter of the branch
2. Anchor wire by wrapping 2-3 turns around the trunk or a thicker branch
3. Wrap at 45° angle along the branch — consistent spacing, not too tight
4. Bend SLOWLY — listen for cracking. If you hear a crack, stop immediately
5. Wire in pairs: two branches of similar thickness with one piece of wire

Timing:
- Deciduous: Wire in winter (no leaves = better visibility)
- Conifer: Wire in late autumn (flexible sap)

Removal:
- Check monthly during growing season
- Remove BEFORE wire bites into bark (scarring is permanent)
- Cut wire off in small sections — never unwrap (risks branch breakage)

Common Errors:
- Wire too thin: branch springs back to original position
- Wire too tight: cuts into bark, leaves permanent scars
- Bending too fast: branch snaps at the wire point

Got: Branches held in position, no bark damage. Remove in 3-6 months.

If err: Wire bites bark → cut off immediately. Scar heals 2-3 growing seasons. Cut paste on deep wounds.

Step 5: Repotting

When roots circle pot or soil drains slow.

Repotting Protocol:
1. Timing: Early spring, just as buds begin to swell (species-dependent)
   - Deciduous: When buds are visibly swelling but not yet open
   - Conifer: When new candles begin to elongate
   - Tropical: Any time in active growth (but spring is still safest)

2. Prepare soil mix:
   - Standard: Akadama 1 : Pumice 1 : Lava rock 1
   - Moisture-loving species: Add 1 part organic (bark or peat)
   - Arid species: Increase pumice ratio to 2 parts
   - Sift all components through 2mm and 6mm screens — discard dust and oversized

3. Remove from pot:
   - Run a root sickle around the pot interior
   - Lift tree gently — if stuck, do NOT pull by trunk
   - Use a chopstick to gently untangle the root mass from the outside in

4. Root pruning:
   - Remove no more than 1/3 of root mass
   - Cut circling roots back to where they radiate outward
   - Trim long taproots to encourage lateral feeder roots
   - Preserve fine, white feeder roots — these are the tree's lifeline

5. Place in pot:
   - Secure drainage mesh over holes
   - Thread anchor wires through drainage holes
   - Add a layer of soil, position tree, tie down with anchor wires
   - Fill around roots with chopstick — no air pockets
   - Top-dress with fine akadama or moss

6. Aftercare:
   - Water thoroughly until water runs clear from drainage holes
   - Place in sheltered spot — no direct sun for 2-3 weeks
   - Do NOT fertilize for 4-6 weeks (new roots need to establish)

Got: Tree stable, soil drains, no trunk wobble.

If err: Severe wilt days post-repot → too much root removed. Shade + mist daily + rooting hormone. Recovery 4-8 weeks.

Step 6: Heal Checkpoint

2 weeks post-repot → assess recovery.

Post-Repot Health Triage:
┌──────────────────┬────────────────────────┬─────────────────────┐
│ Indicator        │ Healthy                │ Stressed            │
├──────────────────┼────────────────────────┼─────────────────────┤
│ New buds         │ Swelling or opening    │ Static or browning  │
│ Leaf colour      │ Normal or light green  │ Yellowing or wilting│
│ Soil drainage    │ Water flows through    │ Pools on surface    │
│ Trunk stability  │ Firm, no wobble        │ Rocks when touched  │
│ Root zone smell  │ Earthy, neutral        │ Sour or musty       │
└──────────────────┴────────────────────────┴─────────────────────┘

If 3+ indicators show stress:
1. Move to dappled shade
2. Reduce watering frequency (but don't let soil dry completely)
3. Mist foliage morning and evening
4. Do NOT fertilize — stressed roots cannot absorb nutrients
5. Reassess at 4 weeks

Got: New bud activity + stable within 2-3 weeks.

If err: No growth @ 6 weeks + stressed → move to larger recovery container w/ standard mix for 1 full growing season.

Step 7: Seasonal Calendar

Bonsai Seasonal Calendar (Temperate Zones):
┌─────────┬──────────────────────────────────────────────────┐
│ Season  │ Tasks                                            │
├─────────┼──────────────────────────────────────────────────┤
│ Spring  │ Repot (early). Begin fertilizing (balanced).     │
│         │ Structural prune before bud break. Remove wire   │
│         │ from autumn. Move outdoor trees to growing area.  │
├─────────┼──────────────────────────────────────────────────┤
│ Summer  │ Maintenance pruning ongoing. Water daily (twice   │
│         │ in heat). Reduce fertilizer in peak heat. Watch   │
│         │ for pests (aphids, spider mites). Shade conifers  │
│         │ from afternoon sun if > 35°C / 95°F.             │
├─────────┼──────────────────────────────────────────────────┤
│ Autumn  │ Wire deciduous trees after leaf fall. Final       │
│         │ fertilize with low-nitrogen (0-10-10). Let        │
│         │ deciduous leaves fall naturally — don't strip.     │
│         │ Reduce watering as growth slows.                  │
├─────────┼──────────────────────────────────────────────────┤
│ Winter  │ Protect from hard freeze (unheated garage or cold │
│         │ frame for temperate species). Water sparingly —    │
│         │ soil should be just moist. Study, plan, sharpen   │
│         │ tools. Contemplate the tree's bare structure.     │
└─────────┴──────────────────────────────────────────────────┘

Got: Year-round rhythm established.

If err: Missed task (spring repot) → wait next year. Out-of-season repot > waiting.

Check

  • Species fits zone + experience
  • Meditate checkpoint pre-structural
  • ≤1/3 foliage removed per session
  • Wire ~1/3 branch dia, 45°
  • Soil sifted + free-draining + species-fit
  • ≤1/3 root mass removed
  • Heal checkpoint 2 weeks post-repot
  • Seasonal tasks aligned

Traps

  1. Over-prune: Too much foliage → weakens. Doubt → leave.
  2. Forgotten wire: Left too long → scars bark perm. Monthly reminder.
  3. Wrong season repot: Summer / mid-winter → kills.
  4. Overwater: More die from over than under. Check soil before → not schedule.
  5. Impatience: Bonsai = decades. Shaped this year → finished in 5. This is practice.
  6. Indoor: Most bonsai = outdoor trees. Indoor (except tropical) → slow decline (low light + dormancy disrupt).

  • prepare-soil — soil mix overlaps bonsai substrate
  • maintain-hand-tools — bonsai tools (concave cutter, wire cutter, jin pliers) same sharpen + oil care
  • meditate — pre-work contemplative (full protocol)
  • heal — post-intervention health assessment (full protocol)
  • plan-garden-calendar — seasonal timing aligns w/ solar/lunar

GitHub 저장소

pjt222/agent-almanac
경로: i18n/caveman-ultra/skills/cultivate-bonsai
0
agentsagentskillsai-assisted-developmentclaude-codeskillsteams

연관 스킬

content-collections

메타

이 스킬은 콘텐츠 콜렉션(Content Collections)을 위한 프로덕션 검증된 설정을 제공합니다. 콘텐츠 콜렉션은 Markdown/MDX 파일을 Zod 검증이 포함된 타입 안전한 데이터 콜렉션으로 변환해주는 TypeScript 최우선 도구입니다. 블로그, 문서 사이트 또는 콘텐츠 중심의 Vite + React 애플리케이션을 구축할 때 타입 안전성과 자동 콘텐츠 검증을 보장하기 위해 사용하세요. Vite 플러그인 구성과 MDX 컴파일부터 배포 최적화 및 스키마 검증에 이르기까지 모든 것을 다룹니다.

스킬 보기

polymarket

메타

이 스킬은 개발자들이 Polymarket 예측 시장 플랫폼을 활용한 애플리케이션을 구축할 수 있도록 지원하며, 거래 및 시장 데이터를 위한 API 통합 기능을 포함합니다. 또한 WebSocket을 통한 실시간 데이터 스트리밍을 제공하여 실시간 거래와 시장 활동을 모니터링할 수 있습니다. 이를 통해 거래 전략을 구현하거나 실시간 시장 업데이트를 처리하는 도구를 생성하는 데 활용할 수 있습니다.

스킬 보기

creating-opencode-plugins

메타

이 스킬은 개발자들이 명령어, 파일, LSP 작업 등 25개 이상의 이벤트 유형에 연결되는 OpenCode 플러그인을 만들 수 있도록 돕습니다. JavaScript/TypeScript 모듈을 위한 플러그인 구조, 이벤트 API 명세, 구현 패턴을 제공합니다. OpenCode AI 어시스턴트의 라이프사이클을 사용자 정의 이벤트 기반 로직으로 가로채거나, 모니터링하거나, 확장해야 할 때 사용하세요.

스킬 보기

sglang

메타

SGLang은 RadixAttention 프리픽스 캐싱을 활용하여 JSON, 정규식, 에이전트 워크플로우를 위한 고속 구조화 생성에 특화된 고성능 LLM 서빙 프레임워크입니다. 특히 반복되는 프리픽스가 있는 작업에서 상당히 빠른 추론 속도를 제공하여 복잡한 구조화 출력 및 다중 턴 대화에 이상적입니다. 제약 디코딩이 필요하거나 광범위한 프리픽스 공유가 있는 애플리케이션을 구축할 때는 vLLM과 같은 대안보다 SGLang을 선택하십시오.

스킬 보기