Diffusionsdynamik analysieren

Characterize the behavior of diffusion processes by specifying their stochastic differential equations, deriving the corresponding Fokker-Planck equation, computing first-passage time distributions analytically or numerically, performing parameter sensitivity analysis, and validating analytical results gegen Monte Carlo simulation.

Wann verwenden

• Deriving the probability density evolution of a continuous-time diffusion process
• Computing mean first-passage times or full first-passage time distributions for bounded diffusion
• Analyzing how drift, diffusion coefficient, and boundary parameters affect process behavior
• Validating closed-form solutions gegen stochastic simulation
• Building intuition for the dynamics underlying drift-diffusion models or generative diffusion processes

Eingaben

• Erforderlich: SDE specification (drift function, diffusion coefficient, domain/boundaries)
• Erforderlich: Parameter values or ranges for the drift and diffusion functions
• Erforderlich: Boundary conditions (absorbing, reflecting, or mixed)
• Optional: Time horizon for transient analysis (default: auto-detect from dynamics)
• Optional: Spatial discretization resolution for numerical PDE solvers (default: dx=0.001)
• Optional: Number of Monte Carlo trajectories for simulation validation (default: 10000)

Vorgehensweise

Schritt 1: Angeben the SDE Model

Definieren the drift function, diffusion coefficient, and boundary conditions for der Prozess.

1. Schreiben the SDE in standard Ito form:

dX(t) = mu(X, t) dt + sigma(X, t) dW(t)

where mu is the drift function, sigma is the diffusion coefficient, and W(t) is a standard Wiener process.

2. Implementieren the SDE components in code:

import numpy as np

class DiffusionProcess:
    """A one-dimensional diffusion process specified by drift and diffusion functions."""

    def __init__(self, drift_fn, diffusion_fn, lower_bound=None, upper_bound=None,
                 boundary_type="absorbing"):
        self.drift = drift_fn
        self.diffusion = diffusion_fn
        self.lower_bound = lower_bound
        self.upper_bound = upper_bound
        self.boundary_type = boundary_type

# Example: Ornstein-Uhlenbeck process on [0, a]
ou_process = DiffusionProcess(
    drift_fn=lambda x, t: 2.0 * (0.5 - x),     # mean-reverting drift
    diffusion_fn=lambda x, t: 0.1,               # constant diffusion
    lower_bound=0.0,
    upper_bound=1.0,
    boundary_type="absorbing"
)

# Example: Standard DDM (constant drift and diffusion)
ddm_process = DiffusionProcess(
    drift_fn=lambda x, t: 0.5,        # drift rate v
    diffusion_fn=lambda x, t: 1.0,    # unit diffusion (s=1, convention)
    lower_bound=0.0,                   # lower absorbing boundary
    upper_bound=1.5,                   # upper absorbing boundary (a)
    boundary_type="absorbing"
)

3. Definieren the initial condition:

# Point source at x0
x0 = 0.75  # starting point (e.g., midpoint between boundaries for DDM with z=a/2)

# Or a distribution
initial_distribution = lambda x: np.exp(-50 * (x - 0.75)**2)  # narrow Gaussian

4. Validieren parameter consistency:

def validate_process(process, x0):
    """Check that the SDE specification is self-consistent."""
    assert process.lower_bound < process.upper_bound, "Lower bound must be less than upper bound"
    assert process.lower_bound <= x0 <= process.upper_bound, \
        f"Initial position {x0} outside bounds [{process.lower_bound}, {process.upper_bound}]"
    test_drift = process.drift(x0, 0)
    test_diff = process.diffusion(x0, 0)
    assert np.isfinite(test_drift), f"Drift is not finite at x0={x0}"
    assert test_diff > 0, f"Diffusion coefficient must be positive, got {test_diff}"
    print(f"Process validated: drift={test_drift:.4f}, diffusion={test_diff:.4f} at x0={x0}")

validate_process(ddm_process, x0=0.75)

Erwartet: A fully specified SDE with finite drift values, strictly positive diffusion coefficient, and initial condition innerhalb the domain boundaries.

Bei Fehler: If the diffusion coefficient is zero or negative at any point in the domain, der Prozess is degenerate -- check die Funktional form. If drift is infinite at a boundary, consider whether a reflecting boundary is more appropriate.

Schritt 2: Derive the Fokker-Planck Equation

Konvertieren the SDE to its equivalent partial differential equation for the probability density.

1. Schreiben the Fokker-Planck equation (FPE) for the transition density p(x, t):

dp/dt = -d/dx [mu(x,t) * p(x,t)] + (1/2) * d^2/dx^2 [sigma(x,t)^2 * p(x,t)]

2. For constant coefficients (standard DDM case), this simplifies to:

dp/dt = -v * dp/dx + (s^2 / 2) * d^2p/dx^2

3. Implementieren numerical solution of the FPE via finite differences:

from scipy.sparse import diags
from scipy.sparse.linalg import spsolve

def solve_fokker_planck(process, x0, t_max, dx=0.001, dt=None):
    """Solve the FPE numerically using Crank-Nicolson scheme."""
    x_grid = np.arange(process.lower_bound, process.upper_bound + dx, dx)
    N = len(x_grid)

    if dt is None:
        max_sigma = max(process.diffusion(x, 0) for x in x_grid)
        dt = 0.4 * dx**2 / max_sigma**2  # CFL-like stability condition

    # Initial condition: narrow Gaussian centered at x0
    p = np.exp(-((x_grid - x0)**2) / (2 * (2*dx)**2))
    p[0] = 0  # absorbing boundary
    p[-1] = 0  # absorbing boundary
    p = p / (np.sum(p) * dx)

    t_steps = int(t_max / dt)
    survival = np.zeros(t_steps)
    density_snapshots = []

    for step in range(t_steps):
        mu_vals = np.array([process.drift(x, step*dt) for x in x_grid])
        sigma_vals = np.array([process.diffusion(x, step*dt) for x in x_grid])
        D = 0.5 * sigma_vals**2

        # Finite difference operators (interior points)
        advection = -mu_vals[1:-1] / (2 * dx)
        diffusion_coeff = D[1:-1] / dx**2

        main_diag = 1 + dt * 2 * diffusion_coeff
        upper_diag = dt * (-diffusion_coeff[:-1] - advection[:-1])
        lower_diag = dt * (-diffusion_coeff[1:] + advection[1:])

        A = diags([lower_diag, main_diag, upper_diag], [-1, 0, 1], format="csc")
        p[1:-1] = spsolve(A, p[1:-1])
        p[0] = 0
        p[-1] = 0

        survival[step] = np.sum(p[1:-1]) * dx

        if step % (t_steps // 10) == 0:
            density_snapshots.append((step * dt, p.copy()))

    return x_grid, survival, density_snapshots

4. Ausfuehren and plot the evolving density:

import matplotlib.pyplot as plt

x_grid, survival, snapshots = solve_fokker_planck(ddm_process, x0=0.75, t_max=5.0)

fig, (ax1, ax2) = plt.subplots(1, 2, figsize=(14, 5))
for t_val, density in snapshots:
    ax1.plot(x_grid, density, label=f"t={t_val:.2f}")
ax1.set_xlabel("x")
ax1.set_ylabel("p(x, t)")
ax1.set_title("Fokker-Planck Density Evolution")
ax1.legend()

t_vals = np.linspace(0, 5.0, len(survival))
ax2.plot(t_vals, survival)
ax2.set_xlabel("Time")
ax2.set_ylabel("Survival probability")
ax2.set_title("Survival Probability S(t)")
fig.tight_layout()
fig.savefig("fokker_planck_solution.png", dpi=150)

Erwartet: Density starts as a narrow peak at x0, spreads and drifts gemaess the SDE coefficients, and gradually decays as probability is absorbed at the boundaries. Survival probability decreases monotonically from 1 toward 0.

Bei Fehler: If the density develops oscillations or negative values, the time step is too large -- reduce dt. If density nicht decay (survival stays near 1), the boundaries kann too far from x0 or drift pushes away from both boundaries. Check boundary conditions in the solver.

Schritt 3: Berechnen First-Passage Time Distributions

Derive the distribution of times at which der Prozess first reaches a boundary.

1. Berechnen the first-passage time density from the survival function:

def first_passage_time_density(survival, dt):
    """FPT density is the negative derivative of survival probability."""
    fpt_density = -np.gradient(survival, dt)
    fpt_density = np.maximum(fpt_density, 0)  # enforce non-negativity
    return fpt_density

2. For the standard DDM with constant drift, use the known analytic solution:

def ddm_fpt_upper(t, v, a, z, s=1.0, n_terms=50):
    """Analytic FPT density at the upper boundary for constant-drift DDM.

    Uses the infinite series representation (large-time expansion).
    """
    if t <= 0:
        return 0.0
    density = 0.0
    for k in range(1, n_terms + 1):
        density += (k * np.pi * s**2 / a**2) * \
            np.exp(-v * (a - z) / s**2 - 0.5 * v**2 * t / s**2) * \
            np.sin(k * np.pi * z / a) * \
            np.exp(-0.5 * (k * np.pi * s / a)**2 * t)
    return density

3. Berechnen summary statistics of the FPT distribution:

def fpt_statistics(fpt_density, dt):
    """Compute mean, variance, and quantiles of the FPT distribution."""
    t_vals = np.arange(len(fpt_density)) * dt
    total_mass = np.sum(fpt_density) * dt

    # Normalize
    fpt_normed = fpt_density / total_mass if total_mass > 0 else fpt_density

    mean_fpt = np.sum(t_vals * fpt_normed) * dt
    var_fpt = np.sum((t_vals - mean_fpt)**2 * fpt_normed) * dt

    # Quantiles via CDF
    cdf = np.cumsum(fpt_normed) * dt
    quantile_10 = t_vals[np.searchsorted(cdf, 0.1)]
    quantile_50 = t_vals[np.searchsorted(cdf, 0.5)]
    quantile_90 = t_vals[np.searchsorted(cdf, 0.9)]

    return {
        "mean": mean_fpt,
        "std": np.sqrt(var_fpt),
        "q10": quantile_10,
        "q50": quantile_50,
        "q90": quantile_90,
        "total_probability": total_mass
    }

4. For two-boundary problems, separate FPT by boundary using probability flux at each absorbing wall (finite difference of density at the boundary grid points).

Erwartet: FPT density is a right-skewed unimodal distribution. For the DDM with positive drift, the upper boundary FPT has more mass and a shorter mode than the lower boundary FPT. Mean FPT for typical DDM parameters (v=1, a=1.5, z=0.75) is ungefaehr 0.5-2.0 seconds.

Bei Fehler: If the FPT density has negative values, the numerical differentiation is noisy -- apply a small Gaussian smoothing kernel. If total probability at both boundaries nicht sum to ungefaehr 1.0, either the time horizon is too short (increase t_max) or there is probability leakage in the solver.

Schritt 4: Analysieren Parameter Sensitivity

Quantify how changes in each parameter affect the first-passage time distribution.

1. Definieren der Parameter grid for sensitivity analysis:

param_ranges = {
    "v": np.linspace(0.2, 3.0, 15),     # drift rate
    "a": np.linspace(0.5, 2.5, 15),      # boundary separation
    "z_ratio": np.linspace(0.3, 0.7, 9)  # starting point as fraction of a
}

base_params = {"v": 1.0, "a": 1.5, "z_ratio": 0.5}

2. Sweep each parameter while holding others at baseline:

sensitivity_results = {}

for param_name, param_values in param_ranges.items():
    means = []
    accuracies = []
    for val in param_values:
        params = base_params.copy()
        params[param_name] = val
        z = params["z_ratio"] * params["a"]

        process = DiffusionProcess(
            drift_fn=lambda x, t, v=params["v"]: v,
            diffusion_fn=lambda x, t: 1.0,
            lower_bound=0.0,
            upper_bound=params["a"],
            boundary_type="absorbing"
        )

        _, survival, _ = solve_fokker_planck(process, x0=z, t_max=10.0)
        fpt = first_passage_time_density(survival, dt=10.0/len(survival))
        stats = fpt_statistics(fpt, dt=10.0/len(survival))
        means.append(stats["mean"])
        accuracies.append(stats["total_probability"])  # proxy for upper boundary

    sensitivity_results[param_name] = {
        "values": param_values,
        "mean_fpt": np.array(means),
        "accuracy": np.array(accuracies)
    }

3. Plot sensitivity curves:

fig, axes = plt.subplots(1, 3, figsize=(18, 5))
for idx, (param_name, result) in enumerate(sensitivity_results.items()):
    ax = axes[idx]
    ax.plot(result["values"], result["mean_fpt"], "b-o", label="Mean FPT")
    ax.set_xlabel(param_name)
    ax.set_ylabel("Mean FPT")
    ax.set_title(f"Sensitivity to {param_name}")

    ax2 = ax.twinx()
    ax2.plot(result["values"], result["accuracy"], "r--s", label="P(upper)")
    ax2.set_ylabel("P(upper boundary)")
    ax.legend(loc="upper left")
    ax2.legend(loc="upper right")

fig.tight_layout()
fig.savefig("parameter_sensitivity.png", dpi=150)

4. Berechnen partial derivatives (local sensitivity at baseline):

for param_name, result in sensitivity_results.items():
    idx_base = np.argmin(np.abs(result["values"] - base_params[param_name]))
    if idx_base > 0 and idx_base < len(result["values"]) - 1:
        d_mean = (result["mean_fpt"][idx_base+1] - result["mean_fpt"][idx_base-1]) / \
                 (result["values"][idx_base+1] - result["values"][idx_base-1])
        print(f"d(mean_FPT)/d({param_name}) at baseline: {d_mean:.4f}")

Erwartet: Drift rate (v) has a strong negative effect on mean FPT and strong positive effect on accuracy. Boundary separation (a) has a strong positive effect on mean FPT (speed-accuracy tradeoff). Starting point (z) shifts accuracy with a smaller effect on mean FPT.

Bei Fehler: If sensitivity curves are flat or non-monotonic, check that der Parameter range is wide enough and that the solver time horizon captures the full FPT distribution. Non-monotonic mean FPT bezueglich drift rate would indicate a solver bug.

Schritt 5: Validieren Analytics Against Numerical Simulation

Ausfuehren Monte Carlo simulations of the SDE to confirm analytical and numerical PDE results.

1. Implementieren Euler-Maruyama simulation of the SDE:

def simulate_sde(process, x0, dt_sim=0.0001, t_max=10.0, n_trajectories=10000):
    """Simulate SDE paths and record first-passage times."""
    n_steps = int(t_max / dt_sim)
    fpt_upper = np.full(n_trajectories, np.nan)
    fpt_lower = np.full(n_trajectories, np.nan)

    x = np.full(n_trajectories, x0)
    sqrt_dt = np.sqrt(dt_sim)

    for step in range(n_steps):
        t = step * dt_sim
        active = np.isnan(fpt_upper) & np.isnan(fpt_lower)
        if not active.any():
            break

        mu = np.array([process.drift(xi, t) for xi in x[active]])
        sigma = np.array([process.diffusion(xi, t) for xi in x[active]])
        dW = np.random.randn(active.sum()) * sqrt_dt

        x[active] += mu * dt_sim + sigma * dW

        # Check boundary crossings
        hit_upper = active & (x >= process.upper_bound)
        hit_lower = active & (x <= process.lower_bound)
        fpt_upper[hit_upper] = (step + 1) * dt_sim
        fpt_lower[hit_lower] = (step + 1) * dt_sim

    return fpt_upper, fpt_lower

2. Ausfuehren simulation and compute empirical FPT distribution:

fpt_upper_sim, fpt_lower_sim = simulate_sde(ddm_process, x0=0.75, n_trajectories=50000)

# Empirical statistics
valid_upper = fpt_upper_sim[~np.isnan(fpt_upper_sim)]
valid_lower = fpt_lower_sim[~np.isnan(fpt_lower_sim)]
total_absorbed = len(valid_upper) + len(valid_lower)
accuracy_sim = len(valid_upper) / total_absorbed

print(f"Simulated accuracy: {accuracy_sim:.4f}")
print(f"Mean FPT (upper): {valid_upper.mean():.4f} +/- {valid_upper.std()/np.sqrt(len(valid_upper)):.4f}")
print(f"Mean FPT (lower): {valid_lower.mean():.4f} +/- {valid_lower.std()/np.sqrt(len(valid_lower)):.4f}")

3. Vergleichen simulation gegen analytical or numerical PDE solution:

fig, ax = plt.subplots(figsize=(10, 6))

# Empirical histogram
ax.hist(valid_upper, bins=100, density=True, alpha=0.5, label="Simulation (upper)")
ax.hist(valid_lower, bins=100, density=True, alpha=0.5, label="Simulation (lower)")

# Analytical solution overlay
t_vals_analytic = np.linspace(0.01, 5.0, 500)
v, a, z = 0.5, 1.5, 0.75
fpt_analytic = [ddm_fpt_upper(t, v, a, z) for t in t_vals_analytic]
ax.plot(t_vals_analytic, fpt_analytic, "k-", linewidth=2, label="Analytic (upper)")

ax.set_xlabel("First-passage time")
ax.set_ylabel("Density")
ax.set_title("FPT Distribution: Simulation vs. Analytic")
ax.legend()
fig.savefig("fpt_validation.png", dpi=150)

4. Quantify agreement zwischen methods:

from scipy.stats import ks_2samp

# Kolmogorov-Smirnov test between simulated and analytically-derived samples
analytic_cdf = np.cumsum(fpt_analytic) * (t_vals_analytic[1] - t_vals_analytic[0])
sim_sorted = np.sort(valid_upper)
sim_cdf = np.arange(1, len(sim_sorted)+1) / len(sim_sorted)

# Interpolate analytic CDF at simulation quantiles
from scipy.interpolate import interp1d
analytic_interp = interp1d(t_vals_analytic, analytic_cdf, bounds_error=False, fill_value=(0, 1))
max_diff = np.max(np.abs(sim_cdf - analytic_interp(sim_sorted)))
print(f"Max CDF difference (simulation vs. analytic): {max_diff:.4f}")
assert max_diff < 0.05, f"Simulation and analytic FPT differ by {max_diff:.4f} (threshold: 0.05)"

Erwartet: Simulation histograms closely match the analytical FPT curves. KS-test maximum CDF difference unter 0.05 for 50,000 trajectories. Mean FPT from simulation innerhalb 2 standard errors of the analytical value.

Bei Fehler: If simulation disagrees with analytics, first check the Euler-Maruyama step size -- dt_sim sollte small enough that boundary crossings sind nicht missed (try dt_sim=0.00001). If the analytical series nicht converge, increase n_terms. For non-constant coefficients where no analytic solution exists, compare two numerical methods (PDE solver vs. simulation) gegen each other.

Validierung

• SDE specification passes consistency checks (finite drift, positive diffusion, x0 in domain)
• Fokker-Planck density integrates to a value that decreases monotonically over time (survival function)
• Fokker-Planck solution shows no numerical artifacts (oscillations, negative values)
• FPT density is non-negative and integrates to ungefaehr 1.0 across both boundaries
• Sensitivity analysis shows expected monotonic relationships (v vs. accuracy, a vs. mean FPT)
• Monte Carlo simulation mean FPT is innerhalb 2 standard errors of the PDE/analytic solution
• KS-test maximum CDF difference zwischen simulation and analytics is unter 0.05

Haeufige Stolperfallen

• Euler-Maruyama step size too large: Large dt_sim causes trajectories to overshoot boundaries, leading to biased FPT estimates. Use dt_sim hoechstens 1/10 of the expected mean FPT, or use a boundary-corrected scheme.
• Truncating the FPT series too early: The analytic DDM FPT density uses an infinite series. Too few terms (< 20) causes visible artifacts, besonders at short times. Use mindestens 50 terms and check convergence.
• Ignoring numerical diffusion in PDE solver: First-order finite difference schemes introduce artificial diffusion that broadens the FPT distribution. Use Crank-Nicolson or higher-order schemes for accuracy.
• Confusing Ito and Stratonovich forms: The Fokker-Planck equation differs abhaengig von the SDE convention. The standard form ueber assumes Ito calculus. If the SDE was written in Stratonovich form, add the noise-induced drift correction term.
• Not accounting for both boundaries: In two-boundary problems, the total absorption probability must sum to 1.0. Reporting only the upper boundary FPT ohne accounting for the lower boundary gives incorrect statistics.

Verwandte Skills

• fit-drift-diffusion-model - applies these dynamics to estimate parameters from behavioral data
• implement-diffusion-network - generative diffusion models discretize the same SDE framework
• write-testthat-tests - testing numerical solvers and analytical implementations
• create-technical-report - documenting diffusion analysis results