QuantConnect Optimization (Phase 4)

Progressive Disclosure: This primer loads essential information. Detailed guides in reference/ (load on-demand).

---

When to Use

Load when running /qc-optimize command for parameter tuning after successful backtest (Phase 3).

---

⚠️ CRITICAL CONSTRAINT: Project ID Rule

YOU MUST USE project_id FROM iteration_state.json (created during /qc-backtest)

Why This Matters

1. QC API requires baseline backtest - Cannot optimize empty project
2. Must optimize correct strategy - Use project from Phase 3
3. Prevents API errors - Missing baseline causes failures
4. Maintains audit trail - Same project through all phases

Correct Workflow

# ✅ CORRECT: Read from iteration_state.json
with open('iteration_state.json', 'r') as f:
    state = json.load(f)

project_id = state['project']['project_id']  # REQUIRED
backtest_id = state['phase_results']['backtest']['backtest_id']  # Validate exists

# Validate before optimization
if not project_id or not backtest_id:
    raise ValueError("Run /qc-backtest first - no baseline found")

# Now safe to optimize

Wrong Examples (DO NOT DO)

# ❌ WRONG: Creating new project
project_id = api.create_project("Optimization")  # ERROR: No baseline!

# ❌ WRONG: Hardcoded project_id
project_id = 26135853  # ERROR: Wrong hypothesis!

# ❌ WRONG: Arbitrary project_id
project_id = 12345  # ERROR: Not our strategy!

See qc_optimize.py --help for complete validation logic.

---

CLI Command

# Using qc_optimize.py CLI (progressive disclosure pattern)
qc_optimize.py run --config optimization_params.json --state iteration_state.json

# Check status
qc_optimize.py status --optimization-id <id>

# Get results
qc_optimize.py results --optimization-id <id>

⚠️ IMPORTANT: Access all information via CLI:

• qc_optimize.py --help - All commands and complete reference documentation
• Do NOT read source code or skill files directly

---

Quick Start

1. Define Parameter Grid

{
  "parameters": {
    "rsi_period": [10, 14, 20],
    "stop_loss": [0.03, 0.05, 0.07]
  },
  "target": "TotalPerformance.PortfolioStatistics.SharpeRatio",
  "strategy": "grid"
}

Start small (3-6 combinations) to avoid long execution times.

2. Run Optimization

qc_optimize.py run --config optimization_params.json

3. Evaluate Results (Phase 4 Decision)

Automatic decision thresholds:

• Improvement < 5%: USE_BASELINE (too small)
• Improvement 5-30%: PROCEED_TO_VALIDATION (good improvement)
• Improvement > 30%: ESCALATE_TO_HUMAN (overfitting risk)

Results automatically update iteration_state.json with decision.

---

Common Issues

1. "No baseline backtest found"

Fix: Run /qc-backtest first, verify project_id in iteration_state.json

2. "Grid too large" (>100 combinations)

Fix: Use Euler strategy with limit:

qc_optimize.py run --strategy euler --max-backtests 50

3. API Authentication Errors

Fix: Check .env for QUANTCONNECT_USER_ID and QUANTCONNECT_API_TOKEN

---

Documentation Rules (CRITICAL)

Always store optimization results in PROJECT_LOGS/ folder.

Naming convention: PROJECT_LOGS/optimization_result_<hypothesis_id>.json

See qc_optimize.py --help for complete logging standards.

---

Reference Documentation

Need detailed information? All reference documentation accessible via --help:

python SCRIPTS/qc_optimize.py --help

That's the only way to access complete reference documentation.

Topics covered in --help:

• Optimization strategies (Grid search, Euler sampling, custom)
• Parameter grid setup guidelines
• Phase 4 decision criteria and thresholds
• Manual optimization approach (free tier)
• Native QC optimization API (paid tier)
• Project ID validation workflow
• Common errors and fixes
• Overfitting detection patterns
• Cost estimation methods
• Complete workflow examples

The primer above covers 90% of use cases. Use --help for edge cases and detailed analysis.

---

Authoritative Documentation

When confused about workflow:

• PROJECT_DOCUMENTATION/autonomous_workflow_architecture.md
• PROJECT_DOCUMENTATION/autonomous_decision_framework.md

When confused about schemas:

• PROJECT_SCHEMAS/optimization_strategies_guide.md
• PROJECT_SCHEMAS/performance_thresholds.json

---

Related Skills

• quantconnect-backtest - Phase 3 (MUST run before optimization)
• quantconnect-validation - Phase 5 (runs after optimization)
• decision-framework - Decision routing logic
• quantconnect - Core strategy development

---

Summary

This primer covers:

• ✅ Critical project_id constraint
• ✅ CLI commands for optimization
• ✅ Phase 4 decision thresholds
• ✅ Common issues and fixes
• ✅ Documentation rules
• ✅ Pointers to detailed reference docs

Context usage:

• Before: 582 lines (monolithic)
• After: ~150 lines (primer) + reference docs (load on-demand)
• Savings: 74% immediate context reduction

Key rule: MUST use project_id from iteration_state.json. Cannot optimize without baseline backtest.

---

Version: 2.0.0 (Progressive Disclosure) Last Updated: November 13, 2025 Status: Production Ready