make-fire
À propos
La compétence `make-fire` fournit des instructions étape par étape pour allumer et entretenir un feu en utilisant des méthodes par friction, par étincelle et solaire en milieu sauvage. Elle couvre la préparation des matériaux, la construction du foyer, diverses techniques d'allumage et l'extinction appropriée. Les développeurs doivent utiliser cette compétence lorsque leur application doit guider les utilisateurs à travers des scénarios de survie nécessitant de la chaleur, de la lumière, la purification de l'eau ou un signalement d'urgence.
Installation rapide
Claude Code
Recommandénpx skills add pjt222/agent-almanac -a claude-code/plugin add https://github.com/pjt222/agent-almanacgit clone https://github.com/pjt222/agent-almanac.git ~/.claude/skills/make-fireCopiez et collez cette commande dans Claude Code pour installer cette compétence
Documentation
生火
野外起火、養火也。
用
- 求暖、光、號於野→用
- 沸水淨(見
purify-water)→用 - 煮覓食(見
forage-plants)→用 - 危急求熱氣→用
入
- 必:引源(鎂棒、火石、打火機、弓鑽、凸鏡)
- 必:乾絨
- 可:地限(風、土、覆)
- 可:火之用(暖、炊、號、淨水)
行
一:擇地
擇安、用、少擾之地。
Site Selection Criteria:
┌─────────────────────┬────────────────────────────────────┐
│ Factor │ Requirement │
├─────────────────────┼────────────────────────────────────┤
│ Wind │ Sheltered or with a windbreak │
│ Ground │ Mineral soil, rock, or sand │
│ Overhead clearance │ No branches within 3 m / 10 ft │
│ Distance from water │ At least 5 m / 15 ft from streams │
│ Distance from camp │ Close enough for use, far enough │
│ │ to avoid spark hazards to gear │
│ Drainage │ Slight slope or flat; avoid hollows│
│ │ where rain pools │
└─────────────────────┴────────────────────────────────────┘
清圓徑約 1 m 至礦土。雪濕地→築青木或平石台。
得:地清平、圓內無燃屑、上空足、有遮風。
敗:土不宜→以 4-6 青(活)腕粗木並列為台。風過烈→以木、石、布 45° 斜為屏。
二:集材
分三類、按乾大級之。
Material Grading:
┌──────────┬──────────────────┬──────────────┬───────────────────────────┐
│ Category │ Diameter │ Examples │ Quantity needed │
├──────────┼──────────────────┼──────────────┼───────────────────────────┤
│ Tinder │ Hair-thin fibers │ Birch bark, │ Two fist-sized bundles │
│ │ │ dried grass, │ │
│ │ │ cedar bark, │ │
│ │ │ fatwood │ │
│ │ │ shavings, │ │
│ │ │ cattail fluff│ │
├──────────┼──────────────────┼──────────────┼───────────────────────────┤
│ Kindling │ Pencil-thin to │ Dead twigs, │ Two armfuls, sorted by │
│ │ finger-thick │ split sticks │ thickness │
├──────────┼──────────────────┼──────────────┼───────────────────────────┤
│ Fuel │ Wrist-thick to │ Dead standing│ Enough for intended burn │
│ │ arm-thick │ wood, split │ time (1 armload ≈ 1 hr) │
│ │ │ logs │ │
└──────────┴──────────────────┴──────────────┴───────────────────────────┘
Dryness Test:
- Snap test: dry wood snaps cleanly; damp wood bends
- Sound test: dry wood clicks when struck together; damp wood thuds
- Source priority: dead standing > dead leaning > dead on dry ground > dead on wet ground
得:三堆於臂內。絨骨乾細;枝脆折。
敗:絨皆濕→刮內皮(柏、樺、楊)以刀作細絲。肥松(死松脂心)濕亦燃。末計:用攜物(油棉、蠟紙板)。
三:架火
按用與況擇架。
Fire Lay Decision Table:
┌──────────────┬──────────────────────┬──────────────────────────┐
│ Fire Lay │ Best for │ Construction │
├──────────────┼──────────────────────┼──────────────────────────┤
│ Teepee │ Quick start, boiling │ Lean kindling against │
│ │ water, signaling │ a central tinder bundle │
│ │ │ in a cone shape │
├──────────────┼──────────────────────┼──────────────────────────┤
│ Log cabin │ Sustained heat, │ Stack pairs of sticks in │
│ │ cooking, drying │ alternating layers like │
│ │ │ a cabin; tinder in center│
├──────────────┼──────────────────────┼──────────────────────────┤
│ Lean-to │ Windy conditions │ Push a green stick into │
│ │ │ ground at 30°; lean │
│ │ │ kindling against it with │
│ │ │ tinder underneath │
├──────────────┼──────────────────────┼──────────────────────────┤
│ Platform │ Snow/wet ground │ Lay green logs side by │
│ │ │ side as a base; build │
│ │ │ teepee or log cabin on │
│ │ │ top │
├──────────────┼──────────────────────┼──────────────────────────┤
│ Star/Radial │ Long burns with │ Lay 4-5 logs radiating │
│ │ minimal fuel │ from center like spokes; │
│ │ │ push inward as they burn │
└──────────────┴──────────────────────┴──────────────────────────┘
留隙通氣。火需氧→鬆堆非緊。
得:架穩、絨易引、隙足、枝排使焰漸升絨→枝→薪。
敗:崩→插支棍為柱。氣滯(煙而不焰)→開隙、迎風底留口。
四:引絨
按具擇法。
Ignition Methods (ranked by reliability):
┌───────────────┬────────────────────────────────────────────────┐
│ Method │ Technique │
├───────────────┼────────────────────────────────────────────────┤
│ Lighter/match │ Apply flame directly to tinder for 5-10 sec │
├───────────────┼────────────────────────────────────────────────┤
│ Ferro rod │ Hold rod against tinder; scrape striker down │
│ │ rod at 45° with firm, fast strokes; direct │
│ │ sparks into center of tinder bundle │
├───────────────┼────────────────────────────────────────────────┤
│ Flint & steel │ Strike steel against flint edge to cast sparks │
│ │ onto char cloth laid on tinder │
├───────────────┼────────────────────────────────────────────────┤
│ Bow drill │ Carve fireboard notch; place tinder below; │
│ │ spin spindle with bow using steady, full-length│
│ │ strokes until coal forms in notch │
├───────────────┼────────────────────────────────────────────────┤
│ Solar (lens) │ Focus sunlight through lens onto dark tinder; │
│ │ hold steady until smoke appears; gently blow │
└───────────────┴────────────────────────────────────────────────┘
得:絨於 30 秒內紅(炭)或小焰生。
敗:星落而絨不燃→絨過濕或粗。細之(刮、撕、蓬)。鎂棒先刮鎂屑於絨為催。弓鑽→軸、板同乾軟木(柳、柏、楊),槽達軸心凹。
五:養焰
絨燃乃慎由炭至焰。
- 有炭(弓鑽、火石)→以絨束裹炭,緩吹漸增至焰生
- 置燃絨束於架中
- 以身或屏遮風
- 先加最細枝——鉛粗、置焰觸處
- 各加必先燃乃加次
得:1-2 分鐘內焰由絨升至最細枝。劈啪聲→自續矣。
敗:枝階焰死→枝過粗濕。以刀更劈細、或擇最乾細。焰窒→架過緊、緩提材以通氣。勿猛吹散炭。
六:進薪
漸增材徑。
- 枝穩燃(2-3 分鐘續焰)乃加指粗
- 彼燃足乃加腕粗
- 排薪存氣:相倚或交疊
- 炊用→待燃為炭床(20-30 分鐘)乃置鍋烤架
Fuel Progression:
Tinder → Pencil-thin → Finger-thick → Wrist-thick → Arm-thick
(each stage must be established before adding the next)
得:火穩自續、熱均、每 15-30 分鐘加薪即養。
敗:加大材即死→越級也。退一級築厚炭床乃升。材嘶汽→過濕;劈露內乾、或近火烘再加。
七:滅跡
Extinguishing Protocol:
1. Stop adding fuel 30-60 min before you need the fire out
2. Let wood burn down to ash
3. Spread coals and ash with a stick
4. Douse with water (pour, stir, pour again)
5. Feel with the back of your hand 10 cm / 4 in above the ashes
6. If any warmth is felt, repeat douse-stir-douse
7. When cold to touch, scatter the ash over a wide area
8. Replace any ground cover or duff that was moved
9. "Could someone walk by and not know a fire was here?"
得:地冷、無可見炭、似未擾。
敗:無水→以礦土(非有機腐葉,會悶燃)埋。攪察再三。未冷勿離。炭埋深灰下→撥灰盡滅露炭。
驗
- 地清至礦土或築台
- 三類材於引前皆備
- 架氣通足
- 絨燃、傳枝不死
- 火達自續薪階
- 火全滅——冷觸、無見炭
- 地似無跡
忌
- 絨濕:最常敗也。必細於料、擇立死木
- 薪悶:過急加木斷氧。漸進之
- 忽風:風助亦殺。用通氣、引時遮絨
- 分類亂:絨燃時覓枝→誤時。一擊前盡備盡分
- 濕地導熱:乾木於濕地亦失熱。濕況築台
- 滅不盡:埋炭數時後可復燃。必冷觸方止
參
purify-water— 沸水需續火,法賴此技forage-plants— 多草為絨(樺皮、香蒲絨、乾草),有者需炊paper-making— 以植纖造紙;纖備與搗法同絨備
Dépôt GitHub
Compétences associées
executing-plans
DesignUtilisez la compétence executing-plans lorsque vous disposez d'un plan de mise en œuvre complet à exécuter par lots contrôlés avec des points de contrôle de revue. Elle charge et examine le plan de manière critique, puis exécute les tâches par petits lots (3 tâches par défaut) tout en rapportant la progression entre chaque lot pour une revue par l'architecte. Cela garantit une mise en œuvre systématique avec des points de contrôle de qualité intégrés.
requesting-code-review
DesignCette compétence délègue un sous-agent réviseur de code pour analyser les modifications apportées au code par rapport aux exigences avant de poursuivre. Elle doit être utilisée après avoir terminé des tâches, implémenté des fonctionnalités majeures, ou avant une fusion vers la branche principale. La revue aide à détecter précocement les problèmes en comparant l'implémentation actuelle avec le plan initial.
connect-mcp-server
DesignCette compétence fournit un guide complet permettant aux développeurs de connecter des serveurs MCP à Claude Code via les transports HTTP, stdio ou SSE. Elle couvre l'installation, la configuration, l'authentification et la sécurité pour intégrer des services externes tels que GitHub, Notion et des API personnalisées. Utilisez-la lors de la configuration d'intégrations MCP, de la configuration d'outils externes ou du travail avec le Protocole de Contexte de Modèle de Claude.
web-cli-teleport
DesignCette compétence aide les développeurs à choisir entre les interfaces Web et CLI de Claude Code en fonction de l'analyse des tâches, puis permet une téléportation transparente des sessions entre ces environnements. Elle optimise le flux de travail en gérant l'état et le contexte de la session lors du passage entre le web, la CLI ou le mobile. Utilisez-la pour des projets complexes nécessitant différents outils à diverses étapes.
