maintain-hand-tools
关于
This skill provides maintenance protocols for eight essential garden hand tools, including sharpening, cleaning, and seasonal care routines. It is triggered after garden sessions, monthly during the growing season, at season's end for storage, and before spring for readiness checks. The skill focuses on preserving tool functionality through rust prevention, handle care, and using the correct tools like a sharpening stone.
快速安装
Claude Code
推荐npx skills add pjt222/agent-almanac -a claude-code/plugin add https://github.com/pjt222/agent-almanacgit clone https://github.com/pjt222/agent-almanac.git ~/.claude/skills/maintain-hand-tools在 Claude Code 中复制并粘贴此命令以安装该技能
技能文档
維護手工具
以常規磨利、清潔與季節照護維護園中必要手工具。
適用時機
- 每次園中作業後(速清協議)
- 生長季月度(磨利與上油)
- 生長季末(冬存備)
- 春前(季前備檢)
- 工具感鈍、緊或現鏽時
輸入
- 必要:待維護之園手工具
- 必要:磨石(1000/3000 目組合石或鑽石板)
- 必要:輕機油或山茶油(tsubaki oil)
- 選擇性:鋼絲刷、鋼絲絨(細級)
- 選擇性:亞麻仁油(供木柄)
- 選擇性:220 目砂紙(供柄重處理)
- 選擇性:替柄或配件
步驟
步驟一:知八件必要工具
此為善維護之園核心手工具。無動力工具。
The Eight Essential Garden Hand Tools:
┌───┬─────────────────────┬──────────────────────────────────────────┐
│ # │ Tool │ Primary Use │
├───┼─────────────────────┼──────────────────────────────────────────┤
│ 1 │ Bypass secateurs │ Live stems up to 2cm diameter. The most │
│ │ (hand pruners) │ used tool in the garden. │
├───┼─────────────────────┼──────────────────────────────────────────┤
│ 2 │ Hori-hori │ Japanese soil knife. Digging, cutting, │
│ │ (soil knife) │ weeding, transplanting, measuring depth. │
├───┼─────────────────────┼──────────────────────────────────────────┤
│ 3 │ Hand fork │ Loosening soil, lifting weeds with roots,│
│ │ │ incorporating amendments. │
├───┼─────────────────────┼──────────────────────────────────────────┤
│ 4 │ Trowel │ Planting, transplanting, scooping │
│ │ │ compost, digging small holes. │
├───┼─────────────────────┼──────────────────────────────────────────┤
│ 5 │ Pruning saw │ Woody cuts beyond secateur range │
│ │ (folding or fixed) │ (2-10cm diameter branches). │
├───┼─────────────────────┼──────────────────────────────────────────┤
│ 6 │ Sharpening stone │ Maintains all edged tools. A 1000/3000 │
│ │ (combination) │ grit combo stone handles most needs. │
├───┼─────────────────────┼──────────────────────────────────────────┤
│ 7 │ Watering can │ Precision watering. Long neck for reach, │
│ │ (long-neck, 8-10L) │ fine rose for seedlings. │
├───┼─────────────────────┼──────────────────────────────────────────┤
│ 8 │ Soil rake │ Bed preparation, leveling, seed bed │
│ │ (bow or level-head) │ finishing, light cultivation. │
└───┴─────────────────────┴──────────────────────────────────────────┘
Quality Principle:
Buy the best you can afford, maintain them well, and they will last decades.
A well-maintained mid-range secateur outperforms a neglected expensive one.
預期: 熟核心工具集與每工具之主用。
失敗時: 若預算有限,按此序優先:修枝剪 → 鏟 → 手叉 → hori-hori。此四涵園事 90%。
步驟二:用後速清(2-3 分鐘)
每次放工具時行此。
After-Use Protocol:
1. Wipe soil off all metal surfaces with a rag or handful of grass
2. For sticky sap (especially on secateurs): wipe with alcohol or WD-40
3. Dry all metal surfaces — moisture left on steel = rust within 24 hours
4. Return tools to their hanging storage (not a pile on the ground)
The 30-Second Secateur Clean:
1. Open secateurs fully
2. Wipe both blades with an oiled rag
3. Drop one drop of oil on the pivot bolt
4. Open and close 3-4 times to distribute oil
5. Close and store
This takes 30 seconds and adds years to the tool's life.
預期: 每次用後淨乾工具回指定存。
失敗時: 若鏽已始(鋼上橙斑),未晚。見步驟三之補救。
步驟三:月度維護——磨利與上油
生長季每月一次,磨利所有刃。
Sharpening Protocol:
SECATEURS (Bypass Type):
1. Disassemble if possible (remove the centre bolt to separate blades)
2. Identify the beveled blade (the cutting blade — only one side is ground)
3. Soak sharpening stone for 10 minutes in water
4. Place the beveled face flat on the 1000-grit side of the stone
5. Push the blade forward along the stone at the existing bevel angle
(typically 20-25°) — 5-8 strokes
6. Flip stone to 3000-grit — 3-5 finishing strokes
7. Remove any wire edge (burr) by laying the FLAT side of the blade
flat on the stone and making one light pass
8. Reassemble, oil pivot, test cut on a green twig — should slice cleanly
⚠️ Never sharpen the flat (anvil) side of bypass secateurs.
Only the beveled blade gets sharpened.
HORI-HORI:
1. Both edges are beveled — sharpen both
2. Follow the existing bevel angle (usually 15-20°)
3. 5 strokes per side on 1000-grit, 3 strokes per side on 3000-grit
4. Test: should slice through cardboard cleanly
PRUNING SAW:
- Do NOT sharpen pruning saw teeth yourself unless experienced
- Most modern pruning saws have hardened impulse-hardened teeth
- Replace the blade when it stops cutting efficiently (they're consumable)
- Clean and oil the blade only
HAND FORK / TROWEL / RAKE:
- These don't need sharpening (they're for soil work, not cutting)
- Wire brush to remove soil
- Light oil coat on all metal surfaces
General Oiling:
- Use camellia oil (tsubaki) — traditional Japanese tool oil, food-safe
- Alternative: light machine oil or mineral oil
- Apply thin coat with a rag — no dripping
- Focus on: blade surfaces, pivot points, spring mechanisms
- Never use vegetable oils (they go rancid and attract insects)
預期: 所有刃夠利以淨切。所有金屬面輕塗油。
失敗時: 若刃有缺口或崩,需更強磨利——以更粗石(400-600 目)始而以 1000/3000 終。深損或需專業磨。
步驟四:除鏽
對被忽之工具。
Rust Removal Protocol:
1. Soak tool in white vinegar for 2-4 hours (overnight for heavy rust)
2. Scrub with steel wool (fine grade) or wire brush
3. Rinse with clean water and dry IMMEDIATELY — thoroughly
4. Sand any pitting lightly with 320-grit if needed
5. Apply oil immediately after drying
6. For wooden handles affected by moisture: dry completely,
then sand and re-oil (see Step 5)
Prevention (ongoing):
- Oil bucket method: Fill a 5-gallon bucket with sand, pour in 1 cup
of mineral oil, mix. Plunge clean tools into the oiled sand after
each use. The sand cleans, the oil protects.
- Hang tools, never pile them. Air circulation prevents moisture buildup.
- Store in a dry location — not an unheated outdoor shed that
condenses moisture in temperature swings
預期: 鏽除,工具可用,護油已塗。
失敗時: 若鏽已深蝕刃(可見坑),工具已失金屬或不能持利刃。思換——深蝕之修枝刃可損植物組織,招病。
步驟五:柄照護
木柄需年度關注。
Wooden Handle Protocol:
1. Inspect for cracks, splitting, or looseness
- Loose handle: tighten the ferrule (metal collar) or re-seat the tang
- Cracked handle: replace — a cracked handle will break under load
and can cause injury
2. Sand lightly with 220-grit sandpaper
- Follow the grain
- Remove any raised grain, rough spots, or splinters
- Don't over-sand — you're smoothing, not reshaping
3. Apply linseed oil (raw or boiled):
- Boiled linseed oil dries faster (24-48 hours) but has additives
- Raw linseed oil is pure but takes 3-7 days to cure
- Apply with a rag — thin coat, rubbed into the grain
- Two coats, 24 hours apart
- Wipe off any excess after 15 minutes — pooled oil becomes sticky
4. Let cure fully before use (at least 48 hours)
⚠️ SAFETY: Linseed oil rags can spontaneously combust.
After oiling, spread rags flat to dry outdoors or soak in water
and dispose of safely. NEVER ball up oiled rags in a bin.
預期: 光滑、油飾之柄,能去水阻繭。
失敗時: 若柄無可修(深裂、腐),質工具有替柄可得。多修枝剪、叉與鏟廠家售替柄。
步驟六:冥想檢點——冬工具照護儀
季末工具維護為冥想之練。
Winter Tool Care Ritual:
This is not a rush job. Set aside 1-2 hours on a quiet winter day.
Meditate (5-10 minutes):
1. Lay all eight tools out on a clean workbench or table
2. Sit with them. These are the instruments of your year's work.
3. Remember what each tool did this season:
- The secateurs that pruned the roses in June
- The hori-hori that divided the iris in September
- The trowel that planted 200 garlic cloves in October
4. Acknowledge the work. Acknowledge the tools. Acknowledge the hands.
5. When ready, begin the maintenance — slowly, carefully, one tool at a time.
Full Winter Maintenance Sequence:
For each of the 8 tools:
1. Clean thoroughly (wire brush, rag, alcohol for sap)
2. Inspect for damage (loose handles, bent tines, worn edges)
3. Repair what can be repaired (tighten, re-seat, replace parts)
4. Sharpen all edges (full sharpening protocol — both grits)
5. Oil all metal surfaces (heavier coat than monthly — winter storage)
6. Oil all wooden handles (linseed oil, two coats)
7. Hang on pegs in dry storage — tools should not touch each other
Completion:
When all tools are sharp, oiled, and hung, the garden's active year
is complete. The tools will wait, ready, for spring.
Start your seed catalogue browsing now — the tools are ready
before you are.
預期: 所有工具於巔峰狀態,善存以過冬,園丁入休期。
失敗時: 若全略冬維護,作春前緊急清理:鋼絲刷除所有鏽、磨利一切、油潤一切。照護工具從不嫌晚。
驗證清單
- 所有 8 必要工具已清點並齊
- 用後速清已持續行
- 生長季月度已磨利刃具(修枝剪、hori-hori)
- 任何工具面無活鏽
- 木柄光滑、油潤、無裂
- 工具懸存,非堆置,於乾處
- 春前已完冬工具照護儀
- 冥想檢點已合於冬維護
常見陷阱
- 磨修枝剪之錯側:僅斜刃磨。磨平側生縫而致壓而非切
- 用菜油代礦油/山茶油:菜油變敗,招蟲,成黏。恒用礦基油於工具
- 於土中存工具:有園丁將工具插於砂鍋——若砂上油則善(防桶),若乾砂則劣(刮與保濕)
- 忽鬆柄:行中脫柄之工具為安全隱。月查柄
- 略用後清:「我晚做」謂晨即鏽。30 秒清為最要之維護習
- 買廉工具:不能持刃之廉修枝剪較質工具持久數十年之久而更費於煩與植損
相關技能
cultivate-bonsai— 盆景工具(凹剪、線剪、神鉗)循同維護協議sharpen-knife— 深刀具特磨技可用於 hori-hori 與他園刃make-fire— 生火工具(鐵棒、擊石)亦得益於常維護plan-garden-calendar— 冬工具照護為排程季任meditate— 冬工具照護儀用冥想檢點(全協議)
GitHub 仓库
相关推荐技能
executing-plans
设计该Skill用于当开发者提供完整实施计划时,以受控批次方式执行代码实现。它会先审阅计划并提出疑问,然后分批次执行任务(默认每批3个任务),并在批次间暂停等待审查。关键特性包括分批次执行、内置检查点和架构师审查机制,确保复杂系统实现的可控性。
requesting-code-review
设计该Skill可在完成任务、实现主要功能或合并代码前自动调度代码审查子代理,确保实现符合需求和计划。它支持通过指定git SHA范围进行精准的代码变更审查,帮助开发者在关键节点及时发现潜在问题。核心原则是"早审查、勤审查",适用于开发流程的各个关键阶段。
connect-mcp-server
设计这个Skill指导开发者如何将MCP服务器连接到Claude Code,支持HTTP、stdio和SSE三种传输协议。它涵盖了从安装配置到认证安全的完整流程,适用于集成GitHub、Notion、数据库等外部服务。当开发者需要添加集成、配置外部工具或提及MCP相关功能时,这个Skill能提供实用的操作指南。
web-cli-teleport
设计该Skill帮助开发者根据任务特性选择Claude Code的Web或CLI界面,并指导如何在两种环境间无缝迁移会话。它能分析任务复杂度、迭代需求等要素,推荐最优工作界面和工作流。关键特性包括会话状态管理、环境切换指导和上下文优化建议。
