Plannotator CLI Reference

Plannotator is a local, browser-based review layer for agent workflows: it opens plans, diffs, and documents in an annotation UI, the human marks them up, and the structured feedback comes back to you on stdout. It installs as a single plannotator binary plus per-host hooks, so plan review fires automatically when you exit plan mode; every other surface is launched explicitly from the CLI. A session runs on a random localhost port (fixed port 19432 in remote mode) and blocks until the reviewer submits feedback, approves, or closes the tab.

This skill is the knowledge layer. The plannotator-review, plannotator-annotate, and plannotator-last skills are thin launchers for the three most common actions; use this reference when you need to pick the right command or flags yourself.

Choose the command

The user wants	Run
Review a plan you produced	Nothing. Plan review opens automatically on plan exit via hooks. Never run bare plannotator yourself.
Review current code changes	plannotator review
Review a GitHub PR or GitLab MR	plannotator review <PR_URL>
Annotate a markdown, text, config, or HTML file	plannotator annotate <file>
Annotate a web page	plannotator annotate <https-url>
Annotate a running local app (dev server)	plannotator annotate <http://localhost:PORT/>
Pick a file to annotate from a folder	plannotator annotate <folder/>
Annotate your latest assistant message	plannotator last
Browse past plan decisions	plannotator archive
Export or share a Guided Review	plannotator guide export / plannotator guide share
Reopen or list live sessions	plannotator sessions

Session model

Every review or annotate command starts a local web server, opens the browser, and blocks until the human decides. That can take minutes. Launch it with a long (or no) command timeout, or in the background, then read stdout when the process exits. Do not kill the process to "finish" a review; a session that ends without a decision reads as no feedback.

The stdout contract is the whole interface:

• Plaintext (default): empty output on close, The user approved. on approve, otherwise the feedback text. Address returned feedback in the same conversation.
• --json: one JSON record, {"decision":"approved"|"dismissed"|"annotated","feedback":"..."}. An approval may still carry notes in feedback; treat those as guidance, not a change request.
• --hook: hook-native output for real PostToolUse/Stop hook contexts only. Approve/close emits nothing (hook passes); annotations emit {"decision":"block","reason":"..."}. --hook implies the gate UI. Never use it for a normal interactive invocation.

plannotator <command> --help prints usage without launching anything. Bare plannotator is the hook entry point and expects hook JSON on stdin.

plannotator review

plannotator review [--git | --gitbutler] [--local | --no-local] [--tailscale] [PR_URL]

Reviews local VCS changes, or a pull request when a URL is given. Feedback and annotations come back on stdout when the reviewer submits; an approval comes back as an LGTM-style message.

• VCS is auto-detected (JJ, GitButler, Git, and P4 where supported). --git forces plain Git; --gitbutler forces GitButler (requires the but CLI 0.21.0+). Running from a non-VCS parent folder that contains nested repos produces a combined workspace diff.
• The default diff is "everything a PR would show now": merge-base of the trunk vs the working tree plus untracked files. The reviewer can switch diff types in the UI; you do not control that from the CLI.
• PR review (plannotator review https://github.com/owner/repo/pull/123, GitLab MR URLs too) needs an authenticated gh or glab CLI. --local (the default) builds a local checkout of the PR head in the background for full file access; --no-local skips it and reviews the platform diff only.
• --tailscale publishes the loopback session over the user's tailnet via tailscale serve (HTTPS, never public) and prints the URL with a QR code. A publish failure exits nonzero instead of leaving the server hanging.

plannotator annotate

plannotator annotate <target> [--markdown] [--no-jina] [--app | --static] [--render-html] [--tailscale] [--gate] [--json] [--hook]

Opens one document, page, or app in the annotation UI and returns the human's annotations on stdout.

Targets:

• Markdown and text files: .md, .mdx, .txt.
• Plain-text config and data files, rendered as text: .yaml, .yml, .json, .jsonc, .json5, .toml, .ini, .cfg, .conf, .properties, .csv, .tsv, .log, .xml, .env.example. .env itself is deliberately refused (it commonly holds secrets, and annotate history copies file contents). Source-code files belong to plannotator review, not annotate.
• HTML files (.html, .htm): rendered as the raw page by default; --markdown converts to markdown instead. --render-html is accepted for compatibility; raw rendering is already the default.
• URLs (https://...): fetched and converted via Jina Reader by default; --no-jina uses plain fetch plus Turndown instead.
• Running local apps: a loopback http://localhost:PORT/ URL whose probe returns HTML opens in live-app mode (annotate the real running page). --app forces live mode and fails loudly when it cannot apply; --static forces the classic conversion pipeline. Non-loopback URLs always use the conversion pipeline.
• Folders: plannotator annotate docs/ opens a file browser over the folder's supported files.

Single files are capped at 2MB. Files are read from disk at stable project paths; keep the reviewed source where it lives.

Argument tolerance: extra words are fine (plannotator annotate look at notes.md please opens notes.md), but two resolvable targets is an error naming both, and an unrecognized dashed token disables the tolerance so flag typos fail loudly. When nothing resolves in a plain multi-word invocation, the CLI prints an agent-addressed handoff on stdout and exits 0: read it, work out the concrete target, and re-run with that exact path or URL.

Strict gates and exit codes

For a machine-checkable approval gate, add --gate --json plus one or both strict flags:

plannotator annotate report.md --gate --json --require-approval --result-file /tmp/decision.json

• --require-approval: exit code reports the human outcome.
• --result-file <path>: the stdout decision JSON is also published atomically to <path>. The parent directory must exist and the file must not; results resolve from the invocation cwd.

Exit codes under a strict flag (grep convention):

Exit	Meaning
0	Approved. The only success.
1	The reviewer did not approve (annotated or dismissed); the decision record was still published.
2	The gate itself failed: bad flag combination, startup failure (missing file, unreachable URL, oversized file), or the result file could not be published. Never treat as a reviewer outcome.
128+n	Killed by signal n.

Without strict flags, startup failures exit 1 and the exit code carries no decision; parse the output instead. Both strict flags require --gate --json and reject --hook.

plannotator annotate-last

plannotator annotate-last [--stdin] [--tailscale] [--gate] [--json] [--hook]
plannotator last

Opens the latest rendered assistant message from the current agent session in the annotation UI (last is an alias). The session log is discovered per host automatically; --stdin reads the content from stdin instead.

Do not print a commentary or status message immediately before running it: the command targets the latest rendered assistant message, so a preamble becomes the thing being annotated.

plannotator copilot-last

plannotator copilot-last [--gate] [--json] [--hook]

The annotate-last variant for live GitHub Copilot CLI sessions (reads Copilot's session-state events). Normally invoked by the Copilot plugin's /plannotator-last command; use it only inside a Copilot CLI session.

plannotator archive

plannotator archive

Opens a read-only browser over saved plan decisions (approved/denied badges) from the Plannotator data directory. No feedback comes back; the session ends when the user clicks Done.

plannotator guide

plannotator guide list
plannotator guide export --id <savedGuideId> [--out <file.html>]
plannotator guide export --guide <guide.json> --patch <diff.patch> [--out <file.html>]
plannotator guide export --snapshot <snapshot.json> [--out <file.html>]
plannotator guide share --id <savedGuideId> [--public] [--ttl <7d|24h|30m|3600>] [--json]
plannotator guide unshare <id> --token <deleteToken>

Guided Reviews are AI-generated walkthroughs of a diff, produced inside the code review UI. The CLI works with saved ones:

• list shows guides Plannotator has persisted for the current repo.
• export writes one portable, self-contained HTML file (the viewer loads from guides.show). --guide + --patch exports a guide you authored yourself against a unified diff (--patch - reads stdin; validation is strict and names any file the guide references that the patch lacks). --out - writes to stdout. --viewer-url overrides the pinned viewer base.
• share uploads the guide and prints a link. Encrypted by default: the key lives only in the URL fragment and the host stores ciphertext. --public stores it unencrypted so chat apps can unfurl a preview. --ttl sets an expiry; otherwise the link stays until unshare. A saved guide records its link, and a second share --id refuses rather than orphaning the first link's delete token.
• unshare <id> --token <t> removes a link using the delete token printed at share time.

plannotator sessions

plannotator sessions [--open [N]] [--clean]

Lists active Plannotator server sessions. --open reopens session N (default 1) in the browser, useful when a tab was closed mid-review. --clean drops stale entries.

Other subcommands

plannotator setup-goal <interview|facts> <bundle.json | -> [--json]
plannotator uninstall [--purge] [--yes] [--dry-run]
plannotator improve-context

• setup-goal opens the interview or facts-acceptance UI for /goal workflows; it is driven by the plannotator-setup-goal skill and takes a bundle JSON (- reads stdin). Do not hand-build bundles.
• uninstall removes Plannotator-installed components (--purge also deletes local data; --yes is required without a TTY; --dry-run previews).
• improve-context and install-runtime are internal integration commands (hook plumbing and managed runtime install). Never run improve-context directly; plannotator install-runtime agent-terminal exists for reinstalling the optional annotate-terminal runtime and is normally run by the installer.
• Additional host-internal subcommands (the opencode-* and copilot-plan family) are invoked by their plugins, not by you.

Environment variables that change behavior

Variable	Use
PLANNOTATOR_REMOTE=1	Force remote mode (fixed port 19432, wide bind) for SSH/devcontainer sessions; 0 forces local. Unset means SSH auto-detection.
PLANNOTATOR_PORT	Fix the port instead of a random one.
PLANNOTATOR_ORIGIN	Override agent-origin detection (claude-code, codex, opencode, pi, oh-my-pi, amp, droid, copilot-cli, gemini-cli, kiro-cli). Set it when launching Plannotator from a wrapper the detection cannot see through.
PLANNOTATOR_AI=disabled	Disable Ask AI and agent-launched review surfaces in the UI.
PLANNOTATOR_SHARE=disabled	Disable URL sharing, including guide share links.
PLANNOTATOR_DATA_DIR	Move the data directory (default ~/.plannotator): plans, history, drafts, config.
PLANNOTATOR_BROWSER	Open sessions in a specific browser.

Posting annotations into a live session

A running plan-review session exposes a small HTTP API on its base URL for external annotations: POST /api/external-annotations adds inline annotations the reviewer sees immediately, with PATCH/DELETE for updates and an SSE stream at /api/external-annotations/stream. The UI's "copy agent instructions" action puts the full API contract for the current session, with the correct base URL, on the clipboard for handing to an agent or script. If the user pastes such instructions, follow them; do not invent endpoints beyond that contract.

Do not

• Do not parse or scrape the browser UI's HTML; the CLI's stdout (and the documented HTTP API above) is the whole contract.
• Do not use --hook outside a real hook context; use --json when you need structured output.
• Do not run bare plannotator interactively; it is the hook entry point.
• Do not guess flags. Run plannotator <command> --help when unsure; unknown dashed tokens make annotate fail on purpose.
• Do not point plannotator annotate at source-code files or .env files; code goes through plannotator review, and .env is refused.
• Do not start a strict gate (--require-approval) unless a human is actually there to review; the session blocks until they act.